Need help?Do you have a question about the Guild Starfire Bass II and is the answer not in the manual?
General| Body Material | Maple |
|---|---|
| Neck Material | Mahogany |
| Fingerboard Material | Rosewood |
| Number of Frets | 20 |
| Controls | Volume, Tone |
| Finish | Gloss Polyurethane |
| Pickups | Guild BiSonic Bass Humbucking |
| Hardware | Nickel |
| Scale Length | 30 3/4" (781 mm) |
Diagram shows four terminals for the neck pickup, with connections to ground and control circuits.
A 500KΩ potentiometer labeled 'V' controls the volume for the neck pickup.
A 500KΩ potentiometer labeled 'T' with a 0.05 capacitor for the neck pickup tone adjustment.
Four terminals are shown for the bridge pickup, connecting to ground and the control circuits.
A 500KΩ potentiometer labeled 'V' manages the volume for the bridge pickup.
A 500KΩ potentiometer labeled 'T' with a 0.05 capacitor for the bridge pickup tone adjustment.
A switch is depicted, likely for selecting between neck, bridge, or both pickups.
A 500KΩ potentiometer labeled 'MV' serves as the master volume control for the instrument.
