Section 3
3-28
When either the <Edit Neg> or <Edit Pos> key is pressed the PASSWORD
CHECK display menu is activated.
Before the selected set of coefficients can be changed the correct password must be
entered.
If an incorrect password is entered, the error message "Invalid Password" will be
displayed and the edit session will be terminated.
3.7.2.2.2.1.2.1. <Edit Neg> MENU Fn-2
3.7.2.2.2.1.2.1.1. <Edit Neg> MENU Fn-2
(ITS90_Mode_Edit_Probes_Setup_MAIN)
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Neg Coeff Range : <-259C to 0C> ▒
▒a1: ▒
▒b1: ▒
▒c1: ▒
▒c2: ▒
▒c3: ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Edit │Ok │ │Screen 2 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Press <Edit> and use arrow keys to move the highlight to the data line to be changed.
Modify data and press <Ok>.
To Next Page
Loading...