Gulf Coast Fans Twin Star III User Manual (English)

To Next Page

Usethisunitonlyinthemannerintendedbythemanufacturer.Ifyouhavequestions,contactthe

manufacturerattheaddressortelephonenumberlistedinwarranty.

Beforeservicingorcleaningunit,orinstallingalightkit,switchpoweroffatservicepanelandlock

servicepaneltopreventpowerfrombeingswitchedonaccidentally.Whentheservicedisconnecting

means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Installationworkandelectricalwiringmustbedonebyaqualifiedperson(s)inaccordance withall

applicablecodesandstandards,includingfire-ratedconstructioncodesandstandards.

Ifthefanwillbemountedtoaceilingjoist, thejoistmustbeabletosupportthemovingweightofthe

fan(atleast220lbs.)

Whencuttingordrillingintowallorceiling,donotdamageelectricalwiringandotherhiddenutilities.

Thisunitmustbegrounded.

AfterInstallationiscomplete,makesurethatallconnectionsaresecuretoprevent thefanfromfalling.

Makesureallwireconnectionsaresecure,andthattherearenoexposedconductorstrands.

Makesurethatyourinstallationwillnotallowthefanto

comeintocontactwithanyadjacentobstacles,suchas

doors,hanginglamps,etc.

Ifyouareinstallingmorethanoneceilingfan,

donotmixthebladesets.

Thefanmustbemountedwithatleast7feetofclearance

betweenfanbladesandfloor.

WARNING:TOREDUCETHERISKOFPERSONAL

INJURY,DONOTBENDTHEBLADEBRACKETS

WHENINSTALLINGTHEBRACKETS,BALANCING

THEBLADES,ORCLEANINGTHEFAN.DONOT

INSERTFOREIGNOBJECTSINBETWEEN

ROTATINGFANBLADES.

10.

11.

Need help?

Do you have a question about the Gulf Coast Fans Twin Star III and is the answer not in the manual?

Gulf Coast Fans Twin Star III Specifications

General