We advise against using spiked feet with any Guru loudspeakers. The Juniors are
supplied with damping pads to minimise both box movement and mechanical energy
transferred to the surface they are placed on, thus reducing any subsequent loss in
bass response.
Connect your loudspeakers to your amplifier using a high quality speaker cable with
banana type connector plugs. The thickness of the cable should be related to the
distance between the speakers and the amplifier. For most setups we recommend a
1.5 mm
2
speaker cable.
damping material
place close to wall
damping material
place close to wall
damping material
place close to wall
To Next Page
Loading...