EasyManua.ls Logo

GUTMANN Palma 1001 User Manual

GUTMANN Palma 1001
136 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DE
1
02 - 23
24 - 45
46 - 67
68 - 89
90 - 111
112 - 133
DE Montageanleitung Standard
EN Assembly Instruction Standard
FR Mode d’emploi
IT Istruzioni per l'uso
ES Instrucciones de uso
NL Bedieningshandleiding
Question and Answer IconNeed help?

Do you have a question about the GUTMANN Palma 1001 and is the answer not in the manual?

GUTMANN Palma 1001 Specifications

General IconGeneral
BrandGUTMANN
ModelPalma 1001
CategoryVentilation Hood
LanguageEnglish

Summary

Preliminary Notes

Warning Signs and Symbols

Explains warning signs and symbols used in the manual for safety.

Safety Instructions and Risks

Details on installation, electrical safety, exhaust air, and fireplace precautions.

Installation Distances and Connections

Specifies installation heights, exhaust routing, transport, and power supply connection guidelines.

Mounting Accessories and Tools

Wall and Ceiling Mounting Components

Lists required accessories and tools for wall and ceiling mounting the hood.

Tower Components and Mounting Tools

Details specific tower parts and lists general tools needed for the mounting process.

Product Description

Variants and Components Overview

Introduces the different models and lists the main components of the hood.

Dimension Drawings Introduction

Introduces the dimension drawings section for various hood models.

Dimension Drawings: Island Ceiling Attachment

Provides detailed technical dimensions for island ceiling attachment and wall mounting brackets.

Dimension Drawings: Campo W Models

Shows dimension drawings for Campo W models, including exhaust and ambient air considerations.

Dimension Drawings: Palma W Models

Displays dimension drawings for Palma W models, detailing exhaust and ambient air dimensions.

Dimension Drawings: Sombra W Models

Presents dimension drawings for Sombra W models, covering exhaust and ambient air configurations.

Assembly Instructions

Assembly Preparation and On-site Setup

Outlines necessary on-site preparations before installing the hood.

Wall Mounting: Initial Steps

Step-by-step guide for determining hole positions and drilling for wall mounting.

Wall Mounting: Installation and Connection

Continues wall mounting instructions, covering hanger bolt installation and hood hanging.

Wall Mounting: Final Assembly

Covers bending tower notches, fitting towers, and performing a function test.

Ceiling Island Mounting: Preparation and Marking

Details initial steps for ceiling island mounting, including ducting and hole marking.

Ceiling Island Mounting: Tower and Electrical

Continues island mounting, covering tower fitting, exhaust hose attachment, and electrical connection.

Ceiling Island Mounting: Final Tower Fit

Covers canopy body insertion, lower tower adjustment, and function test for island mounting.

Ceiling Mounting: Single Piece Tower Setup

Details removing plugs, pushing tubes into the motor module for single-piece tower mounting.

Ceiling Mounting: Single Piece Tower Final Steps

Covers lifting the hood, securing threaded rods, and attaching metal clips for single-piece tower.

On-site Window Contact Switch Installation

Explains the function and connection of a window contact switch for exhaust air operation.

General Topics

Cleaning and Maintenance

Provides recommendations for cleaning stainless steel, glass, and aluminium surfaces.

Disposal and Environmental Information

Information on recycling packaging, electrical waste disposal, and WEEE directive.

Related product manuals