Guyson 2 - Operation; Operating Procedure

Operation &
Maintenance
Manual
Issue:
10
A6ML0066 – Euroblast SF Instruction Manual
Date:
05/2019
Page: 27
6. Operation
6.1 Operating procedure
 Perform daily maintenance tasks (see section 7.1)
 Switch on main electrical power supply
 Switch on cabinet light
 Start the dust collector
 Start the cyclone
 Turn on the air supply by opening the main air valve
 Ensure any component is grease-free and dry before blasting
 Open the cabinet door
 Place component in cabinet
 Position the blast gun and airwash so that they will be easily reached when using the
gauntlets/gloves and sleeves
 Close the cabinet door securely
 Insert both arms through the armhole entries
GAUNTLETS/GLOVES MUST BE USED IN CONJUNCTION WITH THE
ARMHOLE SLEEVES
 Depress the foot pedal, media will exit from the gun nozzle
 Move the nozzle jet across the component surface at a suitable distance, refer to blast nozzle
settings section
 The component should be blasted evenly
 When the blasting is complete, release the foot pedal
 The door can now be opened, and the component can be removed for inspection
 Further blasting may be necessary, or an adjustment to one or more of the machine or blast
settings
 The air line may be used to clean dust from the component surface