GW Instek AFG-3000 Series - Page 20

AFG-3000 Quick Start Guide
20
ARB - Add Line
Example: ARB Mode, Add line, Address:Data (10:30, 50:100)
Output
1. Press ARB>Edit (F2)>Line (F2)>Start ADD
(F1).
2. Press 1>0>Enter (F5)>Return (F6).
3. Press Start Data (F2)>3>0>Enter (F5)>Return
(F6).
4. Press Stop ADD (F3)>5>0>Enter (F5)>Return
(F6).
5. Press Stop Data (F4)>1>0>0>Enter
(F5)>Return (F6)>Done (F5).
ARB – Output Section
Example: ARB Mode, Output ARB Waveform, Start 0, Length 100.
Output
1. Press ARB>Output (F6).
2. Press Start (F1)>0>Enter (F5)>Return (F6).
3. Press Length (F2)>100>Enter (F5)>Return
(F6).
ARB – Output N Cycle
Example: ARB Mode, Output N Cycle, Start 0, Length 100, Cycles 10.
Output
1. Press ARB>Output (F6).
2. Press Start (F1)>0>Enter (F5)>Return (F6).
3. Press Length (F2)>100>Enter (F5)>Return
(F6).
4. Press N Cycle (F4)>Cycles(F1)>10>Enter
(F5)>Return (F6).
5. Press Trigger (F6) to output once.