EasyManua.ls Logo

GW Instek AFG-3000 Series - Page 29

GW Instek AFG-3000 Series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GETTING STARTED
29
Pollution Degree IEC 61010 Degree 2, Indoor Use
Storage
Temperature
-10~70˚C, Humidity: 70%
Dimensions
(WxHxD)
Bench Top 265 (W) x 107 (H) x 374 (D)
Weight Approx. 4kg
Safety Designed
to
EN61010-1
EMC Tested to EN 55011, IEC-61326
Accessories Test cable(GTL-110× 1), User Manual
Compact Disk × 1, Quick Start Guide × 1,
Power cord × 1
(1). A total of ten waveforms can be stored. (Every waveform can be composed of
1M points maximum.)
(2). Add 1/10th of output amplitude and offset specification per C for operation
outside of 0 C to 28 C range (1-year specification).
(3). Edge time decreased at higher frequency.
(4). Sine and square waveforms above 25 MHz are allowed only with an “Infinite”
burst count.
(5). Harmonic distortion and Spurious noise at low amplitudes is limited by a -70
dBm floor.

Related product manuals