GW Instek GDM-8245 - Outer Casing

GDM-8245 Service Manual
86
Outer Casing
1. Pull the handle base out slightly
2. Turn the handle until it is in the
upright position.
3. Pull the handle bases out from
DMM case.
1
2
3
4. Remove the handle fixtures from
the case insert.
4
5. Remove the screw from the rear
panel.
6. Slide the top case off and
remove.
6
7.
Disassembling the top outer casing is complete. Reverse the procedure to
re-assemble.