GDM-8245 User Manual
34
Continuity Test
Background
Continuity test checks that the resistance in the DUT is
low enough to be considered continuous (of conductive
nature).
The built in buzzer sounds when resistance is less than 5
ohms.
Open Voltage
3 volts maximum.
Protection
450V dc or peak ac continuous.
1. Activate
continuity test
Press the key.
2. Continuity
mode display
appears
Ω
+ Ω
Indicates Continuity test
3. Connect the
test lead and
measure
Connect the test lead between the
and the COM port. The display
updates the reading.
COM
To Next Page
Loading...
