SCANNER (OPTIONAL)
109
10. Move the cursor to the count
number using the Left/Right
key, and change the value using
the Up/Down key.
11. When finished, press the Enter
key. The channel setting appears.
12. The Minimum (first) scanned channel, as set in the
Simple Scan setting, appears. The default setting is
CH101.
13. Set the measurement conditions.
To select measurement item,
press the target key.
To select Auto range, press
the AUTO key.
AUTO
RATE
To manually select the range,
press the Up/Down key.
14. When finished, press the Right
key to confirm the edit and to
move to the next channel.
15. When all channel configurations
are completed, press the Exit
key followed by the ACV or
DCV key. The display goes back
to the default mode.
ACV
SCAN
DCV
STEP
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
