GDM-8261 User Manual
112
Recall Scan/Step Result
Panel operation
1. After the Scan/Step is
completed, the data is stored
internally. Press the Shift key
followed by the ACI (Recall) key.
ACI
RECALL
2. The first channel appears. (example: channel 101)
Vm
DC
RCL
3. To view the Standard
Deviation/Min/ Max/Average
data, press the Left and Right
keys.
4. To move to the next channel,
press the Up/Down key.
5. Press the Exit key to get out
from recall mode.
Setup and Run Monitoring
Panel operation
1. Press the Shift key, the 2nd
(Menu) key, the Left key. The
Scan menu appears.
2ND
MENU
2. Press the Down key followed by
the Left key twice. The Monitor
Scan setting menu appears.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
