GW Instek GDM-8261 - Page 120

GDM-8261 User Manual
120
2. Start trigger
Press the Trig key to start triggering
manually. The
indicator turns
On.
Reading indicator
The reading indicator stays On before triggering.
A
fter triggering, the indicator flashes according to the
external signal trigger timing.
Exit external
trigger
Press the Shift key followed by the
Trig key. The EXT indicator
disappears and the trigger goes back
to internal mode.
TRIG
INT/EXT
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com