GW Instek GDM-8261 - Configure GPIB Interface

GDM-8261 User Manual
124
Insert the GPIB
card
Insert the GPIB card into the slot. Close the cover by
tightening the screws.
Power On
Connect the power cord and turn On the power.
Configure GPIB Interface
GPIB port
configuration
1. Press the Shift key, the 2nd
(Menu) key, the left key
repeatedly until the I/O
configuration menu appears.
2ND
MENU
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com