GW Instek GDM-8261 - Measurement Keys (Upper Row)

GETTING STARTED
13
Sense HI
Terminal
A
ccepts HI sense line in 4W resistance
measurement. For details, see page 32.
Input Lo Terminal
A
ccepts ground (COM) line in all
measurements except the sense line in
4W Resistance (page 32).
Input Hi Terminal
Used as an input port for all
measurements except for DC/AC
Current measurements.
DC/AC 10A
Terminal
A
ccepts DC/AC Current input.
For DCI or ACI details, see page 30.
Main Display
Output On/Off
key
Turns the display on or off. When the
display is turned off, all panel keys
except the Output On/Off key become
disabled. The Output On/Off key is On
by default.
Measurement Keys (upper row)
SHIFT/EXIT
/ EXITSHIFT
The Shift key is used to select the
secondary functions assigned to
each front panel key. When pressed,
the
SHIFT indicator appears in the
display.
A
s the Exit key, it gets out of the
parameter configuration mode and
goes back to the measurement result
display mode.
ACV
Measures AC Voltage (page 26).
SHIFT → ACV
(SCAN)
ACV
SCAN
Starts the optional scan
measurement (page 104).
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com