GW Instek GDM-8261 - Page 14

GDM-8261 User Manual
14
DCV
Measures DC Voltage (page 26).
SHIFT → DCV
(STEP)
DCV
STEP
Starts the step measurement (page
104) using the optional scanner.
ACI
Measures AC Current (page 30).
SHIFT → ACI
(RECALL)
ACI
RECALL
Recalls a normal measurement
result, standard deviation
measurement readings (page 92) or
scan measurement results (page
112).
DCI
Measures DC Current (page 30).
SHIFT → DCI
(STORE)
DCI
STORE
Stores a measurement result (page
91).
2/4W
(Resistance)
Measures 2-wire or 4-wire
Resistance (page 32).
SHIFT → 2/4W
(MATH)
2/4W
MATH
Enters the Math measurement mode
(page 64).
(Diode/
Continuity)
Tests Diode (page 34) or Continuity
(page 35).
SHIFT →
(dBm)
/
dBm
Measures dBm (page 55).
Hz/P (Frequency/
Period)
Measures Frequency or Period (page
38).
SHIFT + Hz/P
(dB)
Hz/P
dB
Measures dB (page 56).
TEMP
(Temperature)
Measures Temperature (page 40).
SHIFT + TEMP
(SENSOR)
Selects the type of thermocouple
used in the Temperature
measurement (page 41).
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com