GW Instek GDM-8261 - Measurement Keys (Lower Row)

GETTING STARTED
15
Measurement Keys (lower row)
AUTO/ENTER
A
s the AUTO key, selects the
measurement range automatically.
A
s the Enter key, confirms the
entered value.
SHIFT → AUTO
(RATE)
/ EXITSHIFT
Selects the measurement update
rate: Slow, Medium, or Fast (page
24).
Up/Down
Selects the parameter in various
occasions: higher (
) or lower
(
).
HOLD
A
ctivates the Hold function (page
60).
SHIFT → HOLD
(COMPare)
/ EXITSHIFT
HOLD
COMP
A
ctivates the Compare
measurement (page 61).
TRIG (Trigger)
Triggers sample acquisition
manually (page 72).
SHIFT → TRIG
(Int/Ext Trigger)
/ EXITSHIFT
TRIG
INT/EXT
Selects the Internal or the External
trigger source (page 72).
Left/Right
Selects parameters in various menus:
left (
) or right ( ).
REL
Measures the Relative value (page
58).
SHIFT → REL
(RELative base)
/ EXITSHIFT
REL
REL#
Manually sets the reference value for
the Relative value measurement
(page 58).
MX/MN
(MAX/ MIN)
Measures the Maximum or the
Minimum value (page 57).
SHIFT → MX/MN
(FILTER)
/ EXITSHIFT
MX/MN
FILTER
Selects the digital filter type for the
signal sampling (page 75).
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com