GDM-8261 User Manual
18
USB device port
ccepts a USB device cable for remote
control; Type A, female connector.
For remote control details, see page
122.
CAL key port
Reserved for internal purposes such as
firmware updates and calibration.
Digital I/O port
ccepts a digital I/O cable for the
Hi/Lo limit tests; DB-9 pin, female
connector.
For digital I/O details, see page 115.
Optional slot x1
ccepts the optional 16 channel scanner module. For
scanner details, see page 96.
Optional
Communication
port
ccepts an optional GPIB or Ethernet
card.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
