2. Edit reference
temperature
Use the Left/Right key to move the
cursor, and use the Up/Down key to
change the value.
Default: 23.00
Press the Enter key to confirm the
alue, or the Exit key to cancel. The
display goes back to the previous
menu.
(confirm)
(cancel)
Select Temperature Sensor Type
Background
The GDM-8261 supports a number of thermocouple
types as well as 2 or 4 wire RTD. It is important to
specify the type of temperature sensor used.
Parameter RTD type Range Resolution
All (based on
PT100)
-200~600°C 0.001°C
1. Open sensor
selection menu
Press the Shift key, then the TEMP
(Sensor) key. The sensor selection
menu appears on the display.
TEMP
SENSOR
2. Select sensor
type
Press the Left and Right arrow keys
to highlight the 2WRTD or 4WRTD
sensor type. Press the down key to
go to the next menu level.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
