ADVANCED MEASUREMENT
65
2. Change the parameter using the
Up/Down key.
3. Press the Enter key to confirm
editing and move to offset
setting.
3. Set the offset
(B)
1st display
Shows the offset (B)
2nd display
Indicates MX+B (The letter B flashes)
1. Use the Left/Right key to move
the cursor (flashing point)
between the offset and digits.
2. Change the parameter using the
Up/Down key.
3. Press the Enter key to confirm
the editing. The MX+B
measurement result appears.
4. View MX+B
To Next Page
Loading...
