SYSTEM/DISPLAY CONFIGURATION
73
DB-9, female
Digital I/O pin
assignment
1. Activate
external trigger
Press the Shift key followed by the
Trig (Int/Ext) key. The EXT
indicator appears on the display.
TRIG
INT/EXT
2. Start trigger
Press the Trig key to start triggering
manually. The
indicator turns
On.
Reading indicator
The reading indicator does not flash before triggering
(can be on or off). After triggering, the indicator flashes
according to the external signal trigger timing.
Exit external
trigger
Press the Shift key followed by the
Trig key. The EXT indicator
disappears and the trigger goes back
to internal mode.
TRIG
INT/EXT
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
