GDM-8261 User Manual
74
Set Trigger Delay
Background
Trigger delay defines the time delay between triggering
and measurement start. The default is set at 10ms. The
delay settings are not supported when the optional
scanner is installed.
Panel operation
1. Press the Shift key, the 2nd
(Menu) key, the Right key, the
Down key. The delay menu
appears.
2ND
MENU
2. Press the Down key. The delay
setting appears.
3. Move the flashing point (cursor)
using the Left/Right key.
Change the value using the
Up/Down key.
4. Press the Enter key to confirm
editing and press the Exit key.
The display goes back to
previous mode.
Range 0 ~ 9999ms, 1ms resolution
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
