GDM-8261 User Manual
76
Filter count
Filter count defines the number of samples to be
averaged per reading. More samples offer low noise but
long delay. Less samples offer high noise but short delay.
Range
2 ~ 100
Filter Setting
Turn on F ilter
1. Press the Shift key followed by
the MX/MN (Filter) key.
MX/MN
FILTER
1st display
Shows the filter count
2nd display
Shows the filter type (flashing)
2. Select the filter type using the
Up/Down key.
3. Move the cursor to filter count
using the Left/Right key.
Change the value using the
Up/Down key.
4. Press the Enter key to confirm
editing. The Filter indicator
appears on the display.
FILT
Indicates manual Filter setting
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
