SYSTEM/DISPLAY CONFIGURATION
85
Auto-Gain
Background
The Auto-Gain (A-GAIN) setting performs auto gain
correction of the internal amplifiers.
Setting
Off, On (default=On)
Applicable
Measurement
Mode, Rate and
Speed settings
Mode Rate Accuracy Speed
Quick Speed
DCV,
DCI
S
M
F
TC (No Speed setting)
Panel operation
1. Press the Shift key followed by
the 2nd (Menu) key. Press the
right key twice to choose the
SET ADC menu.
2ND
MENU
2. Press the Down key and then
the Left key to choose A-GAIN.
Press the Down key. The
A-GAIN setting appears.
1st display
Shows A-Zero setting
3. Select the setting using the
Up/Down key.
4. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
