ccurate Speed setting. The ADC Speed settings only
apply to DCV, DCI or 2/4W resistance measurements.
The ADC Speed settings can only be set if DCV, DCI or
2/4W mode is active.
Setting
Quick, Accurate (default=Accurate)
Speed/Rate
Settings
The Speed settings depend on the operating mode and
the rate settings.
Readings/s
Function Rate Digits Accurate Quick
DCV, DCI, 2/4W
(100Ω
~100MΩ)
S 6 ½ 5 30
M 5 ½ 60 600
F 4 ½ 240 2400
Panel operation
1. Ensure a DC related
measurement function is
selected.
DCV page 26
DCI page 30
2/4W page 32
2. Press the Shift key followed by
the 2nd (Menu) key. Press the
right key twice. The SET ADC
menu appears.
2ND
MENU
3. Press the Down key, the right
key and then the down key. The
Speed settings menu appears.
1st display
Shows the Speed setting
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
