SYSTEM/DISPLAY CONFIGURATION
87
4. Use the Up/Down keys to
select either ACCUR or
QUICK.
5. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
Frequency / Period Settings
Input Port Selection
Background
The INJACK settings set which input port is used for
frequency or period measurements.
Setting
OLT, 1A, 10A
Panel operation
1. Press the Shift key followed by
the 2nd (Menu) key. Press the
right key three times. The
Frequency/Period menu
appears.
2ND
MENU
2. Press the Down key twice. The
INJACK setting appears.
1st display
Indicates which input port is assigned
as the input port.
3. Select the input using the
Up/Down key.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
