4. Use the Left/Right keys to
move the cursor to the S1 value
and select a digit.
5. Press the Up/Down key to edit
the selected digit.
6. Press the Enter key to confirm
and automatically go onto S2.
7. Repeat steps 4 to 6 for S2, S3 and S4.
8. Press the Exit key to exit from
the configuration menu.
1. Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 142.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
