GW Instek GDM-8261A - Page 200

GDM-8261A User Manual
200
TRIGger:AUTO?
Returns the Trigger Auto mode.
Return parameter: 0|1, 0=OFF, 1=ON
SAMPle:COUNt
Sets the number of samples.
Parameter: <NR1>(1 ~ 9999) | MIN | MAX
Example: SAMP:COUN 10
Sets the number of samples to 10.
SAMPle:COUNt?
Returns the number of samples.
Parameter: None | MIN | MAX
TRIGger:COUNt
Sets the number of trigger counts.
Parameter: <NR1>(1 ~ 9999) | MIN | MAX
Example: TRIG:COUN 10
Sets the number of trigger counts to 10.
TRIGger:COUNt?
Returns the number of trigger counts.
Parameter: None | MIN | MAX
TRACe:DATA?
Returns the buffer contents of the last logged/recorded measurements.
TRACe:CLEar
Clears the buffer contents.
www. .com
information@itm.com1.800.561.8187