GW Instek GDM-8261A - Refresh Rate Setting; View Serial Number

SYSTEM/DISPLAY CONFIGURATION
75
Refresh Rate Setting
Background
Refresh rate defines how frequently the GDM-8261A
captures and updates the measurement data. A faster
refresh rate yields a lower accuracy and resolution. Slower
refresh rates yield a higher accuracy and resolution.
Consider this trade-off when selecting the refresh rate.
The refresh rate settings are individually set for all
measurement modes except for ACV/ACI
measurements. ACV/ACI use the same refresh rate
settings.
Display/Range
A
S
AC
S
6 ½ digits
M
5 ½ digits
F
4 ½ digits
Refresh rate
selection
Press the Shift key followed by the
AUTO (Rate) key. The refresh rate
indicator switches to the next rate
setting.
/ EXITSHIFT
AUTO
RATE
Refresh Rate
S→M→F→S
View Serial Number
Background
View the serial number using the System menu.
Panel operation
1. Press the Shift key, the 2nd
(Menu) key, followed by the
down key. Then press the left
key repeatedly until the S/N
menu appears.
/ EXITSHIFT
2ND
MENU
HOLD
www. .com
information@itm.com1.800.561.8187