GW Instek GDM-8351 - Reading Indicator; Automatic;Manual Triggering

OPERATION
31
Reading Indicator
Overview
1. The reading indicator next to the 1st display
flashes according to the refresh rate setting.
V
Automatic/Manual Triggering
Overview
By default, the GDM-8351 automatically
triggers according to the refresh rate. See the
previous page for refresh rate setting details.
The TRIG IN pin of the digital I/O port or the
*TRG remote command can be used to
manually trigger acquisition when the trigger
mode is set to EXT. See page 86 for trigger
setting details.
Note
Manual triggering is not supported for capacitance
measurements.