GDM-8351 User Manual
86
Trigger
The measurements can be triggered internally or externally. When
set to internal, the DMM will be triggered automatically according
the refresh rate. When set to external, the DMM will wait for an
external trigger signal from the Digital I/O port or from the *TRG
command. See page 88 & 137 for more details.
Trigger Settings
1. Press the MENU key.
2. Go to MEAS on level 1.
3. Go to TRIG on level 2.
4. Set the TRIG setting to either INT or EXT.
5. Press the Enter key to confirm.
6. Press the EXIT key to exit from the TRIG menu.
GPIBCVCCSWEEPFILTRCLSTOCOMP2ND
SHIFTERRLIMITAUTOMATH4W2WDCAC
m
M
C
mdB
%
AVmm
HzWkM
WSFC
RMTMAXMINRELHOLDSMFAUTO4W2WDCAC
nμF
INJACK setting
To Next Page
Loading...
