GW Instek GDM-8351 - Page 96

GDM-8351 User Manual
96
2. Press MENU.
3. Go to I/O on level 1.
4. Go to RS232 on level 2 and press Enter.
5. The baud rate settings appear. Set the baud
rate.
6. Press Enter to confirm the RS232 settings.
7. Press EXIT to exit from the System menu.
Display
REARGPIBCVCCSWEEPFILTRCLSTOCOMP2ND
dBmEXTSHIFTERRLIMITAUTOMATH4W2WDCAC
AVmm
HzWkM
WSFC
mdB
%
AVmm
HzWkM
WSFC
RMTMAXMINRELHOLDSMFAUTO4W2W
nμF
Baud rate
setting
BAUD menu
indicator
RS232 Pin
Assignments
Pin 2: RxD
Pin 3: TxD
Pin 5: GND
Pin 1, 4, 6 ~ 9: No
Connection
1
2 345
6789
PC Connection
Use a Null Modem connection as shown in the
diagram below.
DMM PC
RxDPin2 RxD Pin2
GNDPin5 GND Pin5
TxD Pin3
TxDPin3