GW Instek GDM-8351 - Configure EOL Character

REMOTE CONTROL
97
Configure EOL Character
Overview
The TX EOL settings set the EOL (end of line)
character for return messages. The EOL characters
that can be received from a PC include CR, LF,
CR+LF or LF+CR, with CR+LF being the most
common.
EOL Characters
CR+LF, LF+CR, CR, LF
Steps
1. Press MENU.
2. Go to TX TERM on level 1.
3. Go to TX EOL on level 2.
4. Set the EOL character.
5. Press Enter to confirm the EOL settings.
6. Press EXIT to exit from the System menu.
Display
REARGPIBCVCCSWEEPFILTRCLSTOCOMP2ND
dBmEXTSHIFTERRLIMITAUTOMATH4W2WDCAC
AVmm
HzWkM
WSFC
mdB
%
AVmm
HzWkM
WSFC
RMTMAXMINRELHOLDSMFAUTO4W2WDCAC
nμF
TX EOL
setting
TX EOL menu
indicator