GDM-906X Series User Manual
22
It indicates the unit is under local
control mode.
It indicates the unit is under remote
control. Refer to page 210 for details.
It indicates RS-232 interface is activated.
Refer to page 215 for details.
It indicates USB - CDC interface is
activated. Refer to page 215 for details.
It indicates USB - TMC interface is
activated. Refer to page 215 for details.
It indicates LAN interface is activated.
Refer to page 229 for details.
It indicates GPIB interface is activated.
Refer to page 224 for details.
It indicates error occurs in commands.
To erase the error icon, it is required to
read or sweep the error by remote
control commands or reboot action.
Refer to page 326 for details.
It indicates rear panel control. When the
icon appears, only rear panel is available;
otherwise, use front panel for
measurement. Refer to page 18 for details.
It indicates the shift key is being pressed
ready for in conjunction with other keys
for additional functions. Refer to page
15 for details.
It indicates the active bottom menu
corresponding to function keys is the
first menu. Click the Knob key (Enter)
to switch to the second function menu.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
