REMOTE CONTROL
229
Activate Ethernet Interface
Ethernet(LAN)
port activation
0. Press the Menu key, and then
the Page Down key repeatedly
until the Interface
configuration menu appears.
1. Press the F5 (Enter) key or
Knob key followed by scrolling
Knob key or pressing +/- keys
to land on the LAN option.
2. Press the F5 (Enter) key or
Knob key to select the LAN
option.
3. Connect the Ethernet cable to
the rear panel Ethernet port.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
