REMOTE CONTROL
231
3. Use the Left/Right keys to
move the cursor followed by
scrolling Knob key or pressing
+/- keys to set LAN Connect
Delay Time. Also, you can
press Number keys to directly
input a specific digit.
4. Press the F5 (Enter) key or
Knob key again to confirm the
LAN Connect Delay Time.
Reboot LAN Setup
To reboot is used to reset the Ethernet configuration
when new settings have been made. When the Lan Setup
settings have been edited, reboot to validate the changes
and reset the Ethernet to the new configuration settings.
New Ethernet configuration settings are only updated
after the GDM-906X has been reset.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
