GW Instek GDM-9060 - Page 247

REMOTE CONTROL
247
2. The control page appears, a dialog box will appear
prompting for a password. Input the password
(default password: 12345678) if Lan password has
been enabled previously.
Step 2-1 -
Configuration
3. Setting the basic operations and monitor
measurement readings, press apply button to enable
the control settings when parameters have changed.
Step 2-2 -
Command
4. It is available for remote control by manually
inputting the command sets.
w ww. . com
information@itm.com1.800.561.8187