SECTION
2
INSTALLATION AND OPERATION UPACKING AND INSPECTION
THE DIGITAL FUNCTION GENERATOR is packaged to absorb any
reasonable shock encountered during shipping.
Carefully remove the instrument from the shipping container
and inspect for shipping damage. If damage is found, notify
the carrier
immediately.
AC POWER REQUIREMENTS
This instrument operates on line voltages
of
either 100V, 12OV,
22OV,
230V
AC
f
10%
50-60Hz, power dissipation approx. 15VA.
FUSE REPLACEMENT
If for some reason the fuse blows, first try to determine
the cause of the failure and remedy if possible.
NOTE: Replace with the proper size fuse only to prevent damage
to
the instrument.
CONTROLS AND INDICATORS
POWER SWITCH
The power switch applies power to the function generator.
RANGE SWITCH
Seven fixed decades of frequency are provided
by
the RANGE
pushbutton switch. Each of the seven pushbutton RANGE switches
is interlocked. Depressing one pushbutton will release all
others.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
