SYSTEM CONFIG
37
SYSTEM CONFIG
At any time, you can enter the [SYSTEM CONFIG] page by
pressing the SYST key.
Use the direction key to move the cursor to the setting item, the
optional parameters will be displayed at the bottom of the LCD,
press the corresponding function key to set.
All settings of the system configuration are automatically saved
when the system is turned off.
This page offers two options:
SYSTEM INFO - Displays the model, serial number and
firmware/hardware version of the
instrument. This page has no user
configurable options.
SYSTEM SERVICE - Engineering mode, which user is not
allowed to operate.
To Next Page
Loading...
