GW Instek LCR-1100 - Measurement Examples

MEASUREMENT EXAMPLES
47
MEASUREMENT
EXAMPLES
To measure a thin film ceramic capacitor, explain how to measure
the capacitance value.
Before testing, please determine the following measurement
conditions according to the specifications of the capacitor.
 DUT: film capacitor
 Test fixture: If the capacitor can be directly inserted into the
test terminal of the instrument, there is no need to connect
another fixture. If it cannot be used, please choose a test fixture
suitable for the capacitor (Kelvin clip or SMD clip).
 Main parameter: Capacitance (C)
 Secondary parameter: Loss (D)
 Test frequency: 1kHz
 Test level: 1V
Steps
1. Press the power button to start the instrument,
the instrument will enter the <MEAS
DISPLAY> page.
2. Use the arrow keys to move the cursor and
select the setting condition. Warm up for 30
minutes.
[FUNC]: C-D
[FREQ]: 1kHz
[LEVEL]: 1.0V
[RANGE]: AUTO
[EQU]: SER
[SPEED]: SLOW
3. Please install the test fixture or use the test slot
of the instrument.