GW Instek LCR-1100 - Specific Commands; Display Page and Line Control Commands

COMMAND OVERVIEW
59
Commands
DISP:PAGE <meas|setup|system>
DISP:PAGE?
Function： It sets or queries the display page.
Description：
Set parameter <MEAS|SETUP|SYSTem|CSET|SINF>
Set syntax DISP:PAGE
Query syntax DISP:PAGE?
Return data <meas|setup|cset|sinf|system>
Note
 MEAS: Measurement display page
 SETUP: Setup page
 SYSTem: System page
 CSET: OPEN/SHORT calibration page
 SINF: System Information page
DISP:LINE <string>
Function： It displays the specified character string in the help
prompt column of the instrument.
Description：
Set parameter <string> The content of the string to be
displayed, the maximum length of the
string is 28 bytes, if the length exceeds, it
will be ignored.
Set syntax DISP:LINE