GW Instek LCR-1100 - Range Setting Commands

COMMAND OVERVIEW
61
FUNC:LCR:RANG <0|1|2|3|4|5|6|7>
FUNC:LCR:RANG?
Function： It sets or queries the LCR measurement range.
Description：
Set parameter <0|1|2|3|4|5|6|7> 0~7 represents the range
number
Set syntax FUNC:LCR:RANG
Query syntax FUNC:LCR:RANG?
Return data <0|1|2|3|4|5|6|7>
FUNC:DCR:RANG <0|1|2|3|4|5|6|7>
FUNC:DCR:RANG?
Function： It sets or queries the DCR measurement range.
Description：
Set parameter <0|1|2|3|4|5|6|7> 0~7 represents the range
number
Set syntax FUNC:DCR:RANG
Query syntax FUNC:DCR:RANG?
Return data <0|1|2|3|4|5|6|7>
FUNC:RANG:AUTO <ON|OFF|1|0>
FUNC:RANG:AUTO?
Function： It sets or queries the range mode.
Description：
Set parameter <ON|OFF|1|0>
Set syntax FUNC:RANG:AUTO
Query syntax FUNC:RANG:AUTO?
Return data <ON|OFF|1|0>