GW Instek LCR-1100 - Frequency, Speed, and Test Result Commands

LCR-1000 Series
62
FREQ <50|100|120|1k|2k|10k|50k|100k>
FREQ?
Function： It sets or queries the test frequency.
Description：
Set parameter <50|100|120|1k|2k|10k|50k|100k>
Set syntax FREQ
Query syntax FREQ?
Return data <50|100|120|1000|2000|10000|50000| 100000>
Note
 The frequency value can accept any numerical
format, but the data must be the frequency
value of the instrument, and the incorrect
frequency value will use the closest correct
frequency value.
 The frequency values for each model are as
follows:
LCR-1010: 50|100|120|1k|2k|10k
LCR-1100:
50|100|120|1k|2k|10k|50k|100k
APER <SLOW|FAST>
APER?
Function： It sets or queries the test speed.
Description：
Set parameter <SLOW|FAST>
Set syntax APER
Query syntax APER?
Return data <SLOW|FAST>
FETC?
Function： It queries the test results.
Description：
Query syntax FETC?
Return data <primary parameter result, secondary parameter