GW Instek LCR-6100 - Trigger:delay; BIAS Subsystem; Figure 11-12 BIAS Subsystem Command Tree

Command Reference
122
11.14.3 TRIGger:DELAY
The TRIGger:DELAY command sets the trigger delay time.
Command
Syntax
TRIGger:DELAY {<float>,min,max}
TRIGger:DLY {<float>,min,max}
Parameter
Where, is
float value:from 1ms to 60.00s
min: =0ms
max: =60.000s
Example
SEND> TRIG:DLY 1<NL>//1.000s
Query Syntax
TRIGger:DELAY?
TRIGger:DLY?
Query Response
{0.000s~60.00s}
Example
SEND> TRIG:DLY?<NL>
RET> 1.000s<NL>
11.15 BIAS Subsystem
The BIAS subsystem command group sets the DC BIAS switch to ON or
OFF, and sets the DC bias voltage value.
Figure 11-12 BIAS Subsystem Command Tree
Command
Syntax
BIAS {OFF,<-2.5 to +2.5V>,min,max}
Example
SEND> BIAS OFF<NL>
SEND> BIAS 2<NL>
Query Syntax
BIAS?
Query Response
<-2.50V~+2.50V>
Example
SEND> BIAS?<NL>
RET> OFF<NL>
BIAS
{<-2.5V to +2.5V>,
min,max}