be displayed when the bin function is disabled.
-1 – bin out, not in the categorization number
1 ~ 9 – bin number, the categorization result is 1~9.
para compare status 1-4
Measuring comparison result: If any parameter comparison
function is enabled, then the comparison result will be
displayed for all of the parameters.
0 – No comparison
1 – Parameter comparison result OK
2 – Parameter comparison result NG
Multi-step Test Mode
Value transmit mode under Multi-step Test Mode.
<result>,<bin number>,<step 1 result>,<step 1 data>,<step
2 result>,<step 2 data>,<step 3 result>,<step 3
data>........<step n result>,<step n data>
result – Finally judged test result
0 – Test not interrupted. Not completed
1 – Test steps all OK
2 – NG occurs to the test step
bin number - categorization result, and such value will not
be displayed when closing the bin function.
-1 - bin out not in the categorization number
1-9 - bin number the categorization result is 1-9
step result
0 – no test
1 – test OK
2 – test NG
step data
test value
To Next Page
Loading...
