GW Instek LCR Series - List:speed {Maximum|Fast|Medium|Slow|Slow2|0|1|2|3|4; List:speed; List:delay <Delay Time Nr3;Disc; List:delay

COMMAND OVERVIEW
197
current is {0.0002~0.04|MAXimum|MINimum}. The range of DC
current is {0.0002~0.04|MAXimum|MINimum}.
Set syntax
:LIST:CURRent 1
:LIST:CURRent 1M
:LIST:CURRent 1MA
:LIST:CURRent 1E-3
:LIST:CURRent MAXimum
:LIST:CURRentMINimum
Query syntax
:LIST:CURRent?
Return data 1.000000E+00 (Format is in <NR3>)
When the Level setup is current mode, the data returns 9.9E37.
:LIST:SPEEd {MAXimum|FAST|MEDium|SLOW|SLOW2|0|1|2|3|4}
:LIST:SPEEd?
Function： It sets or queries the SPEED of list mode.
Description：
Set parameter MAXimum/0, FAST/1, MEDium/2, SLOW/,SLOW2/4
Set syntax
:LIST:SPEEd
1
:LIST:SPEEd FAST
Query syntax
:LIST:SPEEd?
Return data FAST (Format is in <disc>)
:LIST:DELay <delay time NR3/disc>
:LIST:DELay?
Function： It sets or queries the DELAY of list mode.
Description：
Set parameter The range of delay time
is
{0.0~5|MAXimum|MINimum}.
Set syntax
:LIST:DELay 0.5
:LIST:DELay 500M
:LIST:DELay 500MS
:LIST:DELay 5E-3
:LIST:DELay MAXimum