GW Instek LCR Series - Sweep:traca:position {-10 ~ 16|Maximun|Minimum; Sweep:traca:position; Sweep:traca:division <Value Nr3;Disc; Sweep:traca:division

LCR-8000 Series User Manual
214
:SWEep:TRACA:POSition {-10 ~ 16|MAXimun|MINimum}
:SWEep:TRACA:POSition?
Function： It sets or queries the position of TRACE A.
Description：
Set parameter
{-10 ~ 16|MAXimun|MINimum}
Set syntax
:SWEep:TRACA:POSition -3
Query syntax
:SWEep:TRACA:POSition?
Return
data -3 (Format is in <NR1>)
:SWEep:TRACA:DIVision <value NR3/disc>
:SWEep:TRACA:DIVision?
Function： It sets or queries the division of TRACE A.
Description：
Set parameter The numeric value can only set 1, 2, 5 and 10(when
Y-axis setup is linear mode).
Set syntax
:SWEep:TRACA:DIVision 2k
Query syntax
:SWEep:TRACA:DIVision?
Return data 2.000000E+03 (Format is in <NR3>)
:SWEep:TRACA:DECade {1~12}
:SWEep:TRACA:DECade?
Function： It sets or queries the decade of TRACE A.
Description：
Set parameter The value of DECADE is {1~12} (when Y-axis setup
is LOG mode).
Set syntax
:SWEep:TRACA:DECade 5
Query syntax
:SWEep:TRACA:DECade?
Return
data 5 (Format is in <NR3>).