GW Instek LCR Series - Sweep:tracb:minimum; Sweep:tracb:result; Sweep:autoscale; Sweep:result

LCR-8000 Series User Manual
218
:SWEep:TRACB:MINimum?
Function： It queries the minimum of TRACE B and corresponding
frequency | voltage | current.
Description：
Query syntax
:SWEep:TRACB:MINimum?
Return data +2.310130E+06,-3.446227E-03 (Format is in
<NR3>).The first data is the corresponding frequency | voltage |
current. The second data is the minimum.
:SWEep:TRACB:RESult?
Function： It queries all of the value data of TRACE B.
Description：
Query syntax
:SWEep:TRACB: RESult?
Return
data +2.218913E-04,+2.215632E-04,+2.216804E-04…(Format
is in <NR3>).
:SWEep:AUToscale
Function： It does the auto scale function.
:SWEep:RESult?
Function： It queries all of the value data of TRACE A and TRACE B.
Description：
Query syntax
:SWEep:RESult?
Return
data +2.218913E-04,+2.215632E-04,+2.216804E-04…(Format
is in <NR3>). It uploads the TRACE A data at the beginning. It starts
uploading TRACE B data when finish uploading TRACE A data.