LCR-8000 Series User Manual
42
Setting beep mode
When the comparison function setting is turned on, the value
judgment result will be indicated by color, and the buzzer function
can be set to use the sound to know the measurement result.
1. Press the Setup button to enter
[MEASURE MODE SETUP] page.
2. Use arrow keys to move cursor and
select BEEP WHEN on the
[MEASURE MODE SETUP] page.
3. Use option key on the right of the LCD screen
to select a desired item.
Turn off the beep function
Buzzer sounds when the test pass
Buzzer sounds when the test fail
To Next Page
Loading...
