GW Instek LCR Series - Setting type

LCR-8000 Series User Manual
62
Setting type
Sweep type has 3 kinds, which are frequency, Vac and Iac, respectively.
Steps
1. Press the Measure button to enter
[MEAS DISPLAY] page, and then press
the SWEEP function button on the
right side of the LCD to enter the
[SWEEP DISPLAY] page.
2. Use arrow keys to move the cursor and
select TYPE item on the [SWEEP
DISPLAY] page.
3. Use option key on the right of the LCD screen to
select a parameter for this sweep item.
Available
parameter
FREQ.
Change frequency range sweep
condition
Vac
Change Vac range sweep condition
Iac
Change Iac range sweep condition
AUTO
FIT
Automatically adjust the Y-axis scale
and position of the sweep graph